Double Push button, without LED, without Rocker, without Frame for 55mm...
Single push-button CTAA-01/04 single button, without LED, without...
Single push-button CTAA-04/04 four button, without LED, without Rocker,...
CSAU-01/01-10 Switching Actuator, compact 18mm depth with enhanced...
RF receiver for Switching of power-consuming devices ( Lighting,...
it will dim most household lamps however it has been specifically...
Single push-button CTAA-01/04 single button, with LED, without Rocker,...
Turn any existing light into a dimmable light, great for kids bedrooms allowing you to leave the light on low whilst they go to sleep
1 x Blinds actuator 230VAC/6A, 1 x Single push-button, complete, C100, white, 2 x Adhesive tape for push-button
EU 1 x Adapter - switching actuator 230VAC/8A, French standard, 1 x Adapter - dimming actuator 230VAC/40-250W, French standard, 1 x Remote control 12 channels
EU 1 x Adapter - switching actuator 230VAC/8A, S13, 1 x Adapter - dimming actuator 230VAC/40-250W, S13, 1 x Remote control 12 channels
1 x Adapter - switching actuator 230VAC/8A, Schuko (side earthing clips), 1 x Adapter - dimming actuator 230VAC/40-250W, Schuko (side earthing clips), 1 x Remote control 12 channels
Blister Pack adaptor switching and adaptor dimming + remote CPAD-00/47
This battery can be used as a replacement battery for the 290271 single push-button C100, the 290272 double push-button C100 and the double remote-control (109383).
Cover FoilThe cover foil is used where 290271 single push-buttons C100, 290272 double push-buttons
You can fix an actuator on the DIN rail clip and then clip both together onto the DIN rail.
RC-Unit The RC-unit is used for limiting voltage peaks occurring when switching off by inductances integrated in fluorescent lamps.
Push-Button Base Plate C100 It is intended as a replacement for the base plate