CEMP-01/03 Adapter Plug British

The adapter plug for the energy meter sensor is used to register the values of electrical consumption such as current, voltage, effective power and/or electrical energy and to send these values to a Room Manager equipped with an "energy management function" for analysis and display. This allows you to monitor energy usage (and therefore cost) on a per socket basis. The energy meter sensor must be left in the socket that you are monitoring with the devices that are using the power connected through it. The power is supplied from the mains through the sensor. The device can also be installed in a switch-box, branch-off or installation box. It can be plugged into an existing British Standard (three pin) socket without any wiring.

The values are transmitted wirelessly to teh Room Manager via the X-Comfort wireless mesh network.

Attention: The device is not calibrated, it can therefore not be used for invoicing purposes! It is only to be used as a guide.

0.35VA/230VAC, British Standard

CEMP-01/03

CALL FOR PRICE